Skip to content
  • There are no suggestions because the search field is empty.

Some or All of the Barcodes Do Not Display When Printing

When the specified format of the barcodes exceeds the length of the barcode, the system cannot generate a barcode.

For example, when printing a barcode that is 6 digits but the format specified is 5 digits, the barcode will not print. This can be corrected by altering the settings before printing the barcodes.

Load Management and from the menu bar at the top of the page, select 'Tools' and 'Labels...', you can change the settings for the 3 different label printing options from here.

Card Print

  • Click on 'Card Print'.
  • Click 'Options' tab.
  • Click 'Manual'.
  • Choose the length and input characters where required.
  • Click 'Save'.

 

Generate Barcode

  • Click on 'Generate Barcodes...'.
  • Click 'Configure'.
  • Click 'Manual'.
  • Choose the length and input characters where required.
  • Click 'Save'.

 

Label Print

  • Click on 'Label Print'. 
  • Click 'Configure'.
  • Click 'Manual'.
  • Choose the length and characters where required. 
  • Click 'Save'.